| Jenis pembayaran: | T/T,Paypal |
| Inkoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Memesan: | 1 Kilogram |
| Transportasi: | Ocean,Land,Air,Express,Others |
| Pelabuhan: | Shenzhen,Guangzhou,Hongkong |
Model No: Ensinger Tecamid® 6/6 Nylon (PA66)
Merek: Tecamid
| Menjual unit | : | Kilogram |
| Tipe paket | : | Paket Ekspor |
The file is encrypted. Please fill in the following information to continue accessing it
Tecamid® 66 HI Fitur Alami PA 66 dengan aditif khusus yang mengurangi degradasi termal rantai molekul. Akibatnya, suhu layanan sekitar 59 ° F lebih tinggi dapat dicapai dibandingkan dengan kemampuan tipe PA66 standar. Tecamid® adalah merek dagang terdaftar dari Ensinger.
Polyamide 66 memiliki kekakuan, kekerasan, ketahanan abrasi yang baik dan stabilitas dimensi termal. Selain itu, Nylon 66 memiliki ketahanan aus yang luar biasa dan sifat gesekan yang rendah. Ini juga memiliki sifat suhu, bahan kimia, dan dampak yang sangat baik. Pengguna harus menyadari kecenderungan PA 66 untuk menyerap kelembaban yang dapat mempengaruhi stabilitas dimensi. Faktanya, PA 66 akan cenderung menyerap lebih banyak kelembaban saat saturasi daripada tipe CAST 6. Telah berhasil digunakan dalam beragam aplikasi mulai dari industri elektronik, kelautan, dan otomotif, hingga forrestry, konstruksi dan penambangan batang lembaran PA6G.
Keuntungan dari Tecamid® 66:
Nylon 6 Nylon 66 Industri:
| DETAIL | |||
|---|---|---|---|
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PA Polyamide Type 6/6 | ||
| Trade Name | TECAMID® 66 | ||
| Additives | Unfilled | ||
| Color | Natural | ||
| Manufacturer | Ensinger | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.14 |
| ASTM D792 | lb/in³ | 0.041 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 1.2 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 8.5 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 12000 |
| Tensile Modulus | ASTM D638 | psi | 350000 |
| Tensile Elongation at Break | ASTM D638 | % | 25 |
| Flexural Strength | ASTM D790 | psi | 15500 |
| Flexural Modulus | ASTM D790 | psi | 440000 |
| Compressive Modulus | ASTM D695 | psi | 392000 |
| Hardness | ASTM D785 | NA | Rockwell M90 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1.1 |
| Dynamic Coefficient of Friction | Dynamic, 40 PSI, 50 FPM | NA | 0.26 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 4.5 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 90 |
| ASTM D648 | °F at 264 psi | 194 | |
| Melting Point Temp | ASTM D3418 | °C | 255 |
| ASTM D3418 | °F | 491 | |
| Max Continuous Operating Temp | °C | 85 | |
| °F | 185 | ||
| Minimum Operating Temp | °C | -30 | |
| °F | -22 | ||
| Flammability Rating | UL94 | NA | V-2 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 4 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.01 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^14 |
| COMPLIANCE | |||
| Description | Value | ||
| FDA | Yes | ||
| USDA | Yes | ||
| NSF | STD 61 | ||
| 3-A Dairy | Yes | ||
| Canadian Food Inspection Agency | No | ||
| USP Class VI | No | ||
| OTHER | |||
| Description | Value | ||
| ASTM Shape Spec | D5989 S-PA0111 (Only >0.062" Thickness) | ||
| Relative Cost | $$$ | ||
| Machinability | 1 | ||
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now